They refused to call me an unreal amount of about 12 thousand. And I decided to put it myself.
After a few days I found free time to install the flashlights removed the fender cover, I put the lantern, and there is no bracket. I went back to that store, and there is no such need to look for in Moscow very long, etc.
Struck on the Internet how much it costs как подключить противотуманные фары на ниссан ноут toigel for the plastic thousand to give … Branded bracket for nisan laptop I looked at this photo and decided to do it myself. I took off the lights and made a model of the future bracket from the cardboard, then I modified it several times until I finished it.
I took off the front bumper to make it easier to customize and install the PTF. Since I have made two holes for fastening, and there are three of them inside the bumper, I made an additional support from a thicker sheet metal I cut off a strip of metal attached to the places where the bolt holes marked the marker, drilled the holes and connected everythingnow the structure was stiff and not stopped hanging from side to side.
Left side of the как подключить противотуманные фары на ниссан ноут for PTF Bumper dismantling bumper removed When everything is connected and switched on, and the headlights are not lit.
Here I was upset I surfed the Internet and found on the disassembly podrulevoy switch with the function of front-rear ptf for tys. And it all worked Lamp indicators work mode 1 mode 2 The soul has now calmed down It turned out much cheaper than in как подключить противотуманные фары на ниссан ноут salon, of course I had to work hard and not a little, but for that I gained valuable experience.
Nissan U10A Фото, взятое со страницы Тохер В итоге выбрал Valeoпроизводство Бельгия, вроде как такие идут при установке на заводе, плюс они идут в комплекте с лампами Philips H8 12v 35w, цена такой лампы в районе руб. Одна противотуманка обошлась в руб.
Зазор между корпусом фары и стеклом, решил промазать прозрачным герметиком Abro для придания герметичности фаре и исключения запотевания. Установку производил по этой схеме, найденной на просторах Инета: А теперь продолжу. Берем часть под номером 2: Собираем и ставим переключатель на место в машине.
Теперь о нюансах включения ПТФ этим переключателем. А вот что получилось у меня Спасибо klayd за идею!